Scissor lift rental Dubai: electric and rough-terrain platforms
A scissor lift raises a wide, guard-railed platform straight up. It carries more people and more material than a boom of the same height and costs less to hire, which is why it is the workhorse of fit-out, MEP and maintenance work across the UAE. APEX PRO rents electric slab scissors and diesel rough-terrain scissors from our base at Saih Shuaib 2, near Dubai Industrial City and Jebel Ali, with delivery to all seven emirates.
Every scissor lift comes with a current third-party inspection (TPI) certificate and is maintained to the manufacturer's schedule. Hire it dry, or with a certified operator, by the day, week, month or project.
Electric slab scissor lifts
Electric "slab" scissors are built for firm, level floors: finished concrete, screed, tiles and epoxy. They are quiet, produce no exhaust and run on non-marking tyres, so they suit occupied buildings and indoor work.
Typical jobs:
- Ceiling grids, gypsum and false-ceiling work in offices, villas and retail units
- MEP first and second fix: ducting, sprinklers, cable trays and lighting
- Shop fit-out in malls, often on night shifts when noise and fumes matter
- Warehouse racking, signage and high-level cleaning
- Facility maintenance in schools, hospitals and hotels
The smallest models are narrow enough to pass through a standard single doorway and fit in a goods lift. Larger slab scissors, around 12–16 m working height, have wider chassis and bigger decks for two or three people and materials.
Some small electric scissors are rated for indoor use only. Outdoor-rated models still have a maximum wind speed on the manufacturer's plate, so check it before you take one onto an open roof or podium.
Rough-terrain scissor lifts
Rough-terrain (RT) scissors are diesel-powered, usually four-wheel drive, with chunky tyres, higher ground clearance and outriggers or levelling jacks on many models. Their decks are large, often with a roll-out extension, and they carry heavier loads than slab machines.
Use an RT scissor for:
- Steel and cladding work around the outside of a building on compacted ground
- Infrastructure and industrial projects in Jebel Ali, Dubai South, Mussafah and similar areas
- Work where a team needs to lift sheets, panels or pipe to height along with tools
- Outdoor events and stage builds on firm, prepared ground
RT scissors are not a substitute for a boom on soft sand or steep slopes. They need reasonably firm, level ground within the gradient the manufacturer allows for travel and for elevating.
How to choose the right scissor lift
- Working height. Working height is platform height plus about 2 m. A 10 m ceiling usually needs a machine with roughly 10 m working height or a little more, so the operator is not over-reaching.
- Deck size and load. Count people, tools and materials. Electric slab scissors usually carry about 230–350 kg; RT scissors often carry 450 kg or more.
- Access route. Measure door widths and heights, ramps, goods-lift size and weight limit. Narrow models are under 0.85 m wide.
- Floor strength. Suspended slabs, mezzanines and raised floors must carry the machine's weight and wheel loads. Ask your structural engineer or main contractor to confirm floor loading before delivery.
- Indoor or outdoor. Fumes, noise and wind decide between electric and diesel.
- Outreach. A scissor only goes straight up, with a small deck extension. If you need to reach over something, you need a boom lift or manlift instead.
Not sure which type suits the job? Our guide boom lift vs scissor lift compares them side by side.
Indoor work in malls, airports and occupied buildings
Many scissor lift jobs in Dubai happen inside buildings that stay open. A few things make those jobs smoother:
- Electric drive and non-marking tyres for polished floors
- Floor protection boards on delicate finishes if the client asks for them
- Delivery timed to the building's loading-bay window or night-work permit
- Charging plan: a socket near the work area and an overnight charge for long shifts
If the floor is too weak, the doorway too narrow or the space has steps, consider a tracked spider lift, which spreads its load on outriggers and climbs where wheels cannot.
Planning a safe scissor lift job
A scissor lift is simple to use, but most incidents come from the same few causes. A short plan before the machine arrives avoids them:
- Holes, edges and slopes. Cover or barrier floor openings, shafts and slab edges, and keep the machine off ramps and slopes beyond the manufacturer's limit while raised.
- Overhead crushing. Beams, ducts and soffits can trap an operator against the guardrail. Raise slowly near overhead structures and keep hands and heads inside the rails.
- Driving while raised. Many scissors can drive at height on firm, level floors, within the limits in the operator's manual. Clear the travel route of cables, debris and people first.
- Exclusion zone. Barrier the area under and around the platform so nobody walks below dropped tools or materials.
- Rescue plan. Agree who can lower the platform from the ground controls or emergency descent if the operator is unwell or the machine stops.
Our risk assessment and method statement, available on request, cover these points for your specific job.
What comes with every scissor lift on hire
- Current TPI certificate travelling with the machine
- Maintenance to manufacturer schedules and to the EN 280 / ANSI A92.20 standards for mobile elevating work platforms
- Preventive service every 250 hours, which covers batteries, hydraulics and tyres in the UAE heat
- Breakdown cover: report a fault before noon and a technician comes the same day, or a replacement goes on the next run
- Risk assessment and method statement on request
Guardrails are the main fall protection on a scissor lift, but some sites also require a harness and restraint lanyard. Check your site's HSE plan; if you need them, we sell and rent certified full-body harnesses with their certificates.
Dry hire, operators and training
On dry hire your own operators run the machine. If your main contractor requires a third-party carded operator and you do not have one, book the scissor lift with one of our certified operators. For teams that use scissors often, our operator training issues a certificate of completion, and third-party (TPI) certification can be arranged.
Hire terms and quotes
We hire scissor lifts by the day, week or month, and on project rates for long fit-outs. Message us on WhatsApp with the working height, location, floor type and dates. You get a written quote with the machine rate, delivery, fuel (for diesel RT models) and operator as separate lines.
We deliver from Saih Shuaib 2 to sites across Dubai and to Abu Dhabi (including Mussafah), Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. The office is open Saturday to Thursday, 07:00 to 19:00. To book, visit our contact page or send a WhatsApp message.
Typical scissor lift sizes on hire (class figures, not a specific model)
| Type | Working height | Platform capacity | Stowed width | Power | Typical use |
|---|---|---|---|---|---|
| Small electric slab | 6–8 m | approx. 230 kg | approx. 0.75–0.85 m | Electric | Ceilings, shop fit-out, through single doors |
| Mid electric slab | 9–12 m | approx. 230–320 kg | approx. 0.8–1.2 m | Electric | MEP, false ceilings, warehouses |
| Large electric slab | 13–16 m | approx. 320–350 kg | approx. 1.2 m | Electric | High ceilings, atria with firm floors, racking |
| Rough-terrain | 10–18 m | approx. 450–680 kg | approx. 1.8–2.3 m | Diesel | Outdoor steel, cladding, industrial sites |
Figures are typical for each class, not a specific model. Tell us the height, load and ground conditions and we confirm the exact machine in writing.
Scissor Lift Rental — FAQs
How high can a scissor lift go?
Scissor lifts on the UAE rental market typically reach from about 6 m to 18 m working height. Electric slab models usually top out around 14–16 m, while diesel rough-terrain scissors reach about 18 m. Working height is the platform height plus roughly 2 m for the person's reach. If you need more height or outreach, a boom lift is usually the better choice.
How much does it cost to rent a scissor lift in Dubai?
The rate depends on the working height, electric or rough-terrain type, hire length and whether you need an operator. Weekly and monthly hires cost less per day than single days. APEX PRO sends a written quote on WhatsApp with the machine rate, delivery, fuel and operator shown separately. Share the height, location and dates to get an exact price.
Can an electric scissor lift be used outdoors?
Some can, some cannot. Many small electric slab scissors are rated for indoor use only, and outdoor-rated models have a maximum wind speed shown on the manufacturer's plate. They also need firm, level ground. For outdoor work on compacted or uneven ground, a diesel rough-terrain scissor lift is the safer choice. Tell us the site conditions and we will confirm.
Will a scissor lift fit through a standard door?
The narrowest electric scissor lifts are under 0.85 m wide and around 2 m high when stowed, so they pass through most standard single doors and fit many goods lifts. Larger slab scissors are about 1.2 m wide. Measure the door width and height, any ramps and the lift car size, and send them to us before delivery.
Do I need a harness in a scissor lift?
The guardrails are the main fall protection on a scissor lift, and manufacturers do not always require a harness. Many UAE sites still ask for a full-body harness and restraint lanyard as a house rule. Check your site's HSE plan or main contractor requirements. APEX PRO sells and rents certified harnesses if your site needs them.
Can I use a scissor lift on a suspended slab or mezzanine?
Only if the floor can carry the machine's weight and wheel loads. Scissor lifts concentrate weight on small tyre contact areas, so a structural engineer or the main contractor should confirm floor loading first. Give us the floor type and we can share the machine weight and wheel load figures. Where the floor is borderline, a lighter spider lift on outriggers may be an alternative.
Do you deliver scissor lifts to Sharjah, Ajman and Abu Dhabi?
Yes. APEX PRO delivers scissor lifts from Saih Shuaib 2 in Dubai to sites in all seven emirates, including Sharjah, Ajman, Abu Dhabi and Mussafah, Ras Al Khaimah, Fujairah and Umm Al Quwain. The delivery charge depends on distance and appears as a separate line on your written quote, so you can see exactly what transport costs.
Last updated
