Tracked spider lift working at a mall atrium skylight, spider lift rental Dubai by APEX PRO

Access platforms · Dubai & all emirates

Spider Lift Rental in Dubai for Narrow and Indoor Access

APEX PRO offers spider lift rental Dubai contractors and facility teams use where a wheeled manlift cannot fit: compact tracked platforms for atriums, malls, glass work, soft ground and tight access. Each machine comes with a current TPI certificate, on dry hire or with a certified operator.

Spider lift rental Dubai: tracked access where wheels cannot go

A spider lift is a compact, tracked work platform that stands on four outriggers, like a spider's legs. It folds down small enough to pass through a doorway, crawl along a corridor or ride up a ramp, then sets up on its outriggers and reaches heights and outreach that would normally need a much bigger boom lift. APEX PRO rents spider lifts from our base at Saih Shuaib 2, near Dubai Industrial City and Jebel Ali, with delivery to all seven emirates.

Each machine travels with a current third-party inspection (TPI) certificate and is maintained to the manufacturer's schedule. Hire it dry, or with a certified operator, by the day, week, month or project.

Where a spider lift beats a boom or scissor lift

Spider lifts are often called tracked access platforms, compact tracked booms or crawler lifts. They earn their place on jobs where a wheeled machine is too wide, too heavy or simply cannot get in.

  • Malls, atriums and hotel lobbies. Narrow models pass through standard double doors and many single doors, then reach high ceilings, chandeliers, skylights and atrium glazing.
  • Glass and facade work. The platform can get close to curtain walls, canopies and glazed roofs, and outreach lets the machine stand back from planters, steps or water features.
  • Soft and uneven ground. Rubber tracks spread the weight, and the outriggers level the machine on slopes and uneven surfaces where a wheeled boom would not be allowed to elevate. That suits villa gardens, landscaped areas, sand and sports pitches.
  • Floors with a weight limit. Many spider lifts are much lighter than a wheeled boom of similar height. With spreader pads under the outriggers, loads can be spread over a larger area. Floor capacity still needs to be checked.
  • Stairs, ramps and tight courtyards. Some models can climb steps or ramps, and the narrow track width gets through gates and side passages around villas and low-rise buildings.

Typical spider lift jobs in the UAE

  • High-level cleaning and maintenance in malls, airports and hotel atriums
  • Glazing, sealant and skylight repairs on glass roofs and curtain walls
  • Lighting, signage, CCTV and decoration installs, including seasonal and event decoration
  • Tree pruning and palm trimming in villa communities and parks
  • Inspection and repair inside warehouses, plant rooms and heritage buildings
  • MEP work above escalators, voids and stairwells

Power options: indoor and outdoor

Most spider lifts are bi-energy. A battery or mains-electric motor runs the machine indoors with no exhaust and low noise, and a petrol or diesel engine takes over outdoors. Lithium-battery models are common on newer machines and can run a full shift indoors. Tracks are usually non-marking, and many contractors add floor protection boards or mats under the outriggers on marble, tiles and timber.

Tell us whether the job is indoor, outdoor or both, and the hours you will be working, so we can match the power pack and charging plan.

Choosing the right spider lift

  1. Working height and outreach. Working height is platform height plus about 2 m. Outreach matters as much as height: a spider lift often has to stand back from the work.
  2. Access route. Measure the narrowest door or gate, the doorway height, any steps or ramps, and the size and weight limit of any goods lift.
  3. Set-up footprint. The outriggers spread wider than the tracks once deployed. Check that there is room to set up at the work point, not just to get there.
  4. Floor or ground. Note the floor finish and any known load limits. On suspended floors, ask your structural engineer or main contractor to confirm what the floor can take; we can share machine weight and outrigger load figures.
  5. Platform load. Spider lift baskets are usually smaller than boom lift platforms, typically rated for two people and light tools. Plan heavy materials separately.
  6. Wind and exposure. Outdoor use is limited by the manufacturer's maximum wind speed, which matters on exposed facades and rooftops.

Photos or a short video of the route from the delivery point to the work area are the quickest way to get the right machine.

Getting the spider lift to the work point

Delivery is often the hardest part of a narrow-access job, so we plan it with you before the machine leaves Saih Shuaib 2:

  • Delivery window. Malls, hotels and towers usually set loading-bay times and may only allow machines in at night. Give us the window and any permit reference.
  • Unloading point. The machine comes off the truck at the loading bay or gate, then tracks under its own power, steered from a remote or the ground controls.
  • Route check. Door widths, thresholds, ramps, corners and lift cars are checked against the folded dimensions of the machine before we confirm the booking.
  • Protection. Agree with the building manager where boards or mats are needed along the route and at the set-up point.
  • Collection. Book collection inside the same window type, so the machine is not stuck inside an occupied building after the job.

Spider lift or spider crane?

The names sound alike, but the machines do different jobs. A spider lift carries people in a basket for work at height. A spider crane is a compact tracked crane that lifts loads such as glass panels, steel and plant. On glazing jobs they often work together: the crane places the panel and the spider lift puts the installers beside it.

What comes with every spider lift on hire

  • Current TPI certificate with the machine
  • Maintenance to manufacturer schedules and to the EN 280 / ANSI A92.20 standards for mobile elevating work platforms
  • Preventive service every 250 hours
  • Breakdown cover: report a fault before noon and a technician comes the same day, or a replacement goes on the next run
  • Risk assessment and method statement on request, including set-up on floors and slopes

Most site HSE plans require people in a boom-type platform, including spider lifts, to wear a full-body harness clipped to the basket anchor. We sell and rent certified harnesses with their certificates.

Dry hire or with an operator

Spider lifts take more skill to set up than a scissor: outrigger positioning, levelling and route planning through a building. If your team does not use them often, book the machine with one of our certified operators, who hold valid third-party operator cards. Dry hire is available for crews already carded on tracked platforms.

Hire terms and quotes

We rent spider lifts by the day, week, month or project. Send the height, outreach, access measurements, location and dates on WhatsApp. You get a written quote with the machine rate, delivery, fuel and operator listed separately.

If the floor is firm and level and you only need to go straight up, a scissor lift is usually cheaper. For open sites where size is no problem and you need more height, a boom lift or manlift is often the better fit. To discuss a narrow-access job, message us or use the contact page.

Typical spider lift sizes on hire (class figures, not a specific model)

ClassWorking heightOutreachTrack widthMachine weightPower
Compact13–17 m6–9 mapprox. 0.75–0.8 mapprox. 1.5–2.5 tBi-energy (battery or electric + petrol/diesel)
Mid-size18–23 m9–12 mapprox. 0.8–1.0 mapprox. 2.5–4 tBi-energy or diesel
Large25–33 m12–17 mapprox. 1.0–1.3 mapprox. 4–6.5 tDiesel or bi-energy

Figures are typical for each class, not a specific model. Tell us the height, load and ground conditions and we confirm the exact machine in writing.

Spider Lift Rental — FAQs

What is a spider lift?

A spider lift is a compact tracked work platform with a boom and four fold-out outriggers that level and stabilise it. It travels narrow and light, so it can pass through doors and onto delicate or soft surfaces, then reach heights and outreach similar to a much larger boom lift. It carries people for work at height, not loads like a crane.

Can a spider lift fit through a doorway?

Compact spider lifts are typically about 0.75–0.8 m wide and around 2 m high when folded, so they pass through most standard double doors and many single doors. Larger models are wider. Measure the narrowest door or gate on the route, the doorway height and any goods lift, and send the figures to us. We will confirm which machine fits.

Will a spider lift damage marble or tiled floors?

Spider lifts normally run on non-marking rubber tracks and spread their weight through outrigger pads, which makes them suitable for many finished floors. To protect marble, tiles or timber, use floor protection boards along the route and under the outriggers. Ask the building's engineer to confirm the floor can take the outrigger loads; we can share the figures.

How much does it cost to hire a spider lift in Dubai?

Spider lift rates depend on working height, outreach, hire length and whether you need an operator. They usually cost more per day than a wheeled boom of the same height because of their compact design. APEX PRO sends a written WhatsApp quote with machine rate, delivery, fuel and operator listed separately. Share your job details for an exact price.

Can a spider lift work on grass, sand or a slope?

Yes, within the manufacturer's limits. Rubber tracks spread the weight on soft ground, and the outriggers level the machine on uneven surfaces and moderate slopes before it elevates. Pads or mats under the outriggers help on soft sand and lawns. Send photos of the ground and the gradient, and we will confirm the right model and set-up.

How high can a spider lift reach?

Spider lifts on the rental market typically range from about 13 m to 33 m working height, with outreach of roughly 6 m to 17 m depending on size. A few specialist models go higher. Working height is the platform height plus about 2 m. Tell us the height and how far the machine must stand back from the work, and we will match the class.

Do I need an operator for a spider lift?

You can hire a spider lift dry if your team holds valid operator cards for this type of platform and your site rules allow it. Because set-up, outrigger levelling and route planning take practice, many clients book the machine with an APEX PRO certified operator. Check your main contractor's requirements, and we will quote both options.

Last updated

Guides on spider lift rental

Request a machine

Quote for spider lift rental.

Send the form and WhatsApp opens with your request ready to send to +971 50 275 6789. We reply with a written rate showing delivery, fuel and operator separately. Prefer email? Write to hire@apexprouae.com.